Manual Method – Update Ford Sync 3 to Sync 3.4 with F9 / 1.19 maps, all regions!

Manual Method – A guide on updating your Ford Sync 3 based car to the latest Sync 3.4 version, now with the latest F9 / 1.19 maps.
Supported regions : Europe, America, Australia, New Zealand, South Africa, Middle East, India, South East Asia, Israel, Turkey, Central America, China and more!

Introduction

This is a newer safer and more compatible guide for Ford / Lincoln Cars to upgrade your Sync 3 on any version to the latest Sync 3.4 version even though older hardware versions of the Sync 3 APIM are not officially compatible with newer versions of Sync.

Thanks to all the Russian guys over at https://ffclub.ru/topic/418797/ and a leaked ford flashing/formatting tool we have a solution.

If you car looks like the left side of this picture you are able to upgrade to Sync 3.4. If you car looks like the right side of this picture then you will require replacement hardware in order to have Sync 3.X

Here are some of the benefits of upgrading to Sync 3.4

  • Android Auto navigation on the small screen in the Dash Cluster / Speedo. (potentially car play aswell)
  • Much snappier and more responsive user interface
  • A nicer looking stock blue theme
  • Newest map data for SatNav
  • If you update your APIM firmware you can also get Radio logos and Calm Mode.
  • There are probably others, if you know of any let me know and i will add them here.

Changelog

24/05/2020 – Restructured the guide, added emphasis to use the application as it’s much simpler for the less techy.
13/05/2020
 – Added additional common issue and also a notice to clarify that you can’t just flash Nav to a Non Nav unit.
12/05/2020
– Added a link to a WIP AsBuilt Database, Frontend by CyanLabs, Backend by Louage.
09/05/2020 
– Added guide for updating the calibration firmware via ForScan thanks to Louage.
09/05/2020 
– Fixed Voice on ROW / South Africa packages, thanks to Kosmik.
09/05/2020
– Added Windows Video Guide https://www.youtube.com/watch?v=Zlxo8E1NLZQ
02/05/2020
– Added “Common Issues” section
28/04/2020
– Added Mac OSX video guide courtesy and with permission of TORQUE & TECH 
14/04/2020
– Added link to https://cyanlabs.net/tutorials/fixing-ford-sync-3-mem_err03/ to fix MEM_ERR03
15/03/2020
– Added warning regarding changing regions
12/03/2020
– Changed non nav package to 19200 to prevent issue where it’s impossible to downgrade due to small storage
08/03/2020
– Fixed typo in EU gracenotes package, not a massive issue but case sensitivity was wrong.
07/03/2020 – Fixed typo in the language file for ROW nav, sorry for the inconvenience, just re flash new file.
05/03/2020
– Fixed typo in the language file for ROW non nav, sorry for the inconvenience, just re flash new file.
05/03/2020
– Added ROW (Middle East, India, Sri Lanka, Israel, South East Asia, South Africa, Caribbean and Central America).
04/03/2020
– Added Australia, New Zealand, South America and Taiwan.
03/03/2020
– Added direct download links as a google drive alternative.
02/03/2020
– Fixed NA non nav link pointing to EU.
01/03/2020 – New guide Sync 3.4.20021 and F9 Maps for EU, NA and CN. Others to follow.

BY FOLLOWING THE BELOW GUIDE YOU TAKE FULL RESPONSIBILITY FOR ANY DAMAGES THAT MAY OCCUR.
I AM NOT RESPONSIBLE FOR YOUR ACTIONS. THIS HAS BEEN EXTENSIVELY TESTED BY MANY PEOPLE WITH MANY DIFFERENT FORD AND LINCOLN CARS WITH NO ISSUES.
I HAVE ALSO PERSONALLY TESTED THIS ON MY OWN FORD FOCUS MK3 2015 WITH A EU NAVIGATION MODEL APIM.
IF YOU PROCEED YOU WILL BE EXTREMELY UNLIKELY TO BE ABLE TO RETURN TO ANYTHING BELOW 3.2 AFTER FOLLOWING THIS PROCEDURE.

Requirements

  • You will need 1 USB drive between 8-32GB, 8GB is fine for non navigation, 32gb is recommended for navigation.
  • A car with Ford / Lincoln Sync 3 installed, if you have the old 4 quadrant sync 2 system as shown above you are out of luck.

Region Information

NA = North America (USA, Canada etc)
English American, French Canadian, Spanish Mexican

EU = Europe
Arabic, Czech, Danish, Dutch, English British, Finnish, French, German, Italian, Polish, Portuguese, Russian, Spanish, Swedish, Turkish

CN = China
English American. Chinese Mandarin, Taiwanese Mandarin

ANZ = Australian, New Zealand, South America, Turkey and Taiwan
ANZ (English Australian, English British), SA (English American, Brazilian Portuguese, Mexican Spanish), TUR (English American, German, Russian, Turkish), TW (Taiwanese Mandarin)

ROW = Middle East, India, Sri Lanka, Israel, South East Asia, South Africa, Caribbean and Central America
Arabic, Dutch, English (All), Canadian French, French, Chinese Mandarin, Portuguese, Spanish, Mexican Spanish and Thai

ONCE YOU HAVE INSERTED THE USB YOU WILL HAVE FORCED YOUR SYNC UNIT IN TO “FACTORY MODE” IT WILL NO LONGER BOOT NORMALLY UNTIL YOU COMPLETE THIS PROCESS!

Manual Method

If you are on Windows we highly recommend using the automated method

1. Downloading the reformat tool

Please note that if you are already on Sync 3.4.19274 or above you won’t be able to enter factory mode, please first downgrade using the downgrade guide.

  1. Download the following 2 files
  2. Make sure your USB is MBR not GPT – Click for instructions
  3. Format the USB drive as exFAT in windows by right clicking the drive in This PC and pressing Format… and then make sure it’s set to exFAT and press Start.
  4. Copy the downloaded autoinstall.lst to the root of your USB drive, make sure it’s named autoinstall.lst.
  5. Create a folder in the root of your USB Drive called SyncMyRide without quotes.
  6. Copy 1u5t-14g386-cb.tar.gz downloaded above to the newly created SyncMyRide folder on your USB drive.
    Do not extract any TAR.GZ files!




2. Downloading the update files from Ford

Select your region, release and map version below, once selected press Generate.

Once you have created your reformat.lst it should look like this with all your tar.gz files in the SyncMyRide folder.

Safely remove the USB Drive, go to your car and follow the Installing the update section below.

Installing the update

  1. insert the USB drive in to your car and make sure the ignition/engine is on, you should see the following message.
  2. You will see the following message, do not remove the USB at this point, it will restart automatically in a few moments.
  3. Once the car has rebooted it will start the reformat process and will progress through the following screens, depending on the packages used it can take between 10-60 minutes.
  4. Once the install is complete you will see this screen, remove the USB and the system should start SYNC if it doesn’t turn the ignition off, open the car door, then close the door and turn the ignition back on.
  5. Once fully booted go to Settings > General > Master Reset, this will clear a lot of bugs and other incorrect information and will be the first thing i tell you to do if you have any issue.

If you want to get Radio Logos and Calm Screen you will need to upgrade your calibration firmware, please refer to Upgrading the APIM Calibration Firmware.

Once you have updated and tested everything, please be so kind as to give back to this guide by filling in the upgrade feedback survey below

Sync 3 Upgrade Record – Form

CyanLabs Ford Hub

Visit our Ford Hub to find all the additional information regarding SYNC such as updating calibration, configuring asbuilt etc.

https://cyanlabs.net/ford

Downgrading

THE WINDOWS APPLICATION HAS BEEN UPDATED TO IMPLEMENT THIS FUNCTION, FOR EASE OF USE PLEASE USE THAT!

In order to use the reformat tool you must be on versions below 3.4.19274. Ford blocked the reformat tool on 19274 or above.

You can however downgrade to an older version to be able to re-use the reformat tool.

  1. Download the following 3 files
  2. Make sure your USB is MBR not GPT – Click for instructions
  3. Format the USB drive as exFAT in windows by right clicking the drive in This PC and pressing Format… and then make sure it’s set to exFAT and press Start.
  4. Copy the downloaded autoinstall.lst to the root of your USB drive, make sure it’s named autoinstall.lst.
  5. Create a folder in the root of your USB Drive called SyncMyRide without quotes.
  6. Copy 5U5T-14G381-AP_1555085337000.TAR.GZ downloaded above to the newly created SyncMyRide folder on your USB drive.
  7. Copy GB5T-14G386-SC_85041.tar.gz downloaded above to the newly created SyncMyRide folder on your USB drive.
    Do not extract any TAR.GZ files!
  8. Safely remove the USB drive.
  1. Switch on your car ignition and insert the USB you will see the following message at the top.
  2. Once the install is complete you will see this screen.
  3. You should now be on version 19101 and can now re-use the reformat tool.
    please note Gracenotes was removed as part of the downgrade, follow the step by step in the application or the manual guide from the start to install your desired version with gracenotes, maps etc.

Contributions and Help

Hopefully you are all up and running with your newly upgraded Sync software however if you are not leave a comment below, send a Facebook message, join the discord server.

When leaving a comment or message please include the following

  1. Region
  2. Sync Version
  3. Navigation or Non Navigation
  4. What type of computer you used (Windows, Mac, Linux etc)
  5. Any relevant information such as error message or screenshot

This will help me help you quicker.

If this guide has been helpful and you would like to support CyanLabs feel free to donate using the button below. This is greatly appreciated but of-course is not required at all, if you use Discord you can also donate by typing “donate” in our server, this will automatically give you the “Supporter” role in Discord

Still Struggling?

Due to the sheer amount of views and comments this guide has received i am unable to help everyone on a 1 by 1 basis however i will try my best to help in our Community Forum and on Discord.

Menu